How to start V900 B2

 Power on/off

power on: turn the power switch to upside "On" position. The indicator will be light constantly with the red color for 3-5 seconds, then change to flash slowly, after about 35 seconds, the indicator change to green color flashed slowly (indicated cancel defense status) or green color lighted constantly (indicate sset defense status) which indicated that the camera search the network and begin to work. A " Di...tone" can be heard from the camera. more information of the status. please refers to indicator status status instruction instruction.

power off: turn the power switch to downside "off" position.

Start remote camera

• Methode 1: call remote camera with the your mobile, the call will be hung up after connected which indicated that your mobile number has been recognized as master.
• methode 2 : edit and send the following SMS to camera : #00# After initiation, the camera will send the following SMS to camera to your mobile " Welcome to use remote camera, the password is 1234".

Active remote control

when the green indicator lightened constantly or flashed press and hold the se key of the host for 2 seconds. The indicator changes to flash with orange color indicated the camera switched to learning state. then press any key of the remote control to send signal to the host. after the host receives the new remote control signal successful the indicator of the host will lighten constantly with green color for 2 seconds, press set key again to exit the learning state. otherwise, it will automatically efter 15 seconds.

remoter camera can be recognized and controller by more than 5 remote controls.

Set defense

press set defense key directly in the remote control to set defense

if setting successful, a " Di.." tone can be heard from the host and a "set defense successfully" SMS will be sent to the master's mobile. the indicator of the host will be lighten constantly with green color.

Cancel Defense

Press cancel defense key directly in the remote control to set defense

if setting successful. a " Di..." tone can be heard from the host and cancel defense successfully, sms will be sent to the master's mobile. the indicator of the host will flashed green color.

capturing images

 capturing one image each time:

• Methode1: master or family cal remote camera number, hung up as soon as the ringing tone is heard. you can received notify message "image capturing request received, the camera is busy sending MMS message", then you will received images later.
• Methode2: send following SMS commanf to camera:

1. For master and family : #03#
2. for guest: #03#password#

Capturing several images one time:

if user need several images, send following SMS command to camera:

1. For master and family : #03#image qulity#
2. for guest: #03#password#image quality#

if the image size is 16x128 or 320x240 the maximum number of the images can be requested at one time is 8, the images quantity number should be set from 1 to 8 as the same, the number should be set between 1 and 2 if the image size is 640x480.

you can receive notify message " image capturing request received, the camera is busy sendeing image", and then you will receive image later.

Listen in Live Voice

initiative listen in:

master or families call the camera and it answers the call automatically, then you can listen in live voice of monitoring area.

Emergency alarm listen in:

in normal status when pressd the emergency alarm key of the remote control, the camera will aoutomatically dial master number, master can listen once answers the call, if master doesnt answer the call, it will be dial other emergency numbers sequentially, if the camera called master number and other emergency number circularly three times and none of the numbers answers the camera exit alarming status automatically.

Check Status

at anytime, send the following SMS command to camera and it will be reply a MMS about the camera's present setting and work status (not including password)

• For master and families : #07#
• For Guest : #07#password#

Getting Help

You can send SMS to the camera to get the SMS command list or the MMS user manual to your cell phone

getting normal command list:

Send the following SMS command to camera:

• For Master and families : #09#
• for guest : #09#password#

 Getting User manual

if you need detail instruction send following SMS command to camera:

• For Master and families : #09#1#
• for Guest : #09#password#1#